melt temperature

melt temperature

美 　英

• 网络熔体温度；熔融温度；熔化温度

例句

Apart from raising the barrel temperature what other techniques can be used to raise the melt temperature?

除了提高料管温度外，还可以使用其他什么方法来提高融料温度？

pressure sensor with incorporated melt temperature sensor inserted in the die adaptor near the breaker plate.

压力传感器与温度传感器整合，置于模头适配器之中。

edy a poor finish, increasing the melt temperature and mold temperature will also improve surface appearance when molding our materials.

伊迪一个贫困的完成，提高熔体温度和模具温度也将改善表面外观时，我们的成型材料。

Melt temperature and mold temperature had no influence on the hollow ratio when the temperature reached a specific range.

熔体温度升到一定范围后对中空率没有影响；

Do not conside the effect of the melt temperature. Use of the relationship between temperature and viscosity and shear energy formula .

利用温度和粘度的关系式及剪切能的计算公式，得到了剪切能与熔体温度的关系式。

The constant volumetric delivery and melt temperature reduction bring a significant improvement in the quality of the end product.

稳定的体积流量和降低熔体温度对于改善最终产品的质量有重要意义。

The series adjustment system that using melt temperature as main parameters was composed in HTM temperature control system.

在热媒温度控制系统中以熔体温度作为主参数，组成串极调节系统。

The melt temperature, stirring speed and proper shearing time were beneficial to the formation of fine globular grains.

即降低降体温度、搅拌速度及适当剪切时间有利于细小球形晶粒的形成。

Start by determining the true melt temperature and set the die body to that temperature.

从确定真正的熔体温度开始，然后按照这个温度设定口模体的温度。

With the increase of the melt temperature, the evaporation trend increases.

随着熔体温度的增加，挥发趋势也增大。

two digital temperature indicators showing the melt temperature before pump and before filter disk.

两个温度传感器一个显示齿轮泵前的熔体温度，另一显示滤盘前的温度。

After put into running, the melt temperature is steady, the running of the regulating valve is smooth, the effect is good.

投入运行后，熔体温度稳定，调节阀动作平稳，效果良好。

The effects of stabilized a-gent, MFR and melt temperature on degrading behavior were discussed.

对助剂量、熔体温度等工艺条件对降解行为的影响进行了讨论。

The mold temperature obviously influences the molding process, while the melt temperature influences comparatively less.

模具温度对成型过程的影响较大，熔体温度的影响相对较小。

Unmelted gels have the same melting point as the surrounding resin, but remained colder than the average melt temperature.

不熔凝胶与周围树脂有同样的熔点，但是受热温度比平均温度低。

Mold temperature, melt temperature, packing pressure, packing pressure time and cooling time are considered as process parameters.

模子的温度，金属温度，填料的压力，填料的加压时间及冷却时间被考虑作为过程参数。

Increased Melt Temperature yields increased Flow.

提高熔融温度导致增加流动

The results showed that melt temperature and gas delay time interaction is more serious to gas fingering influence.

结果表明：熔体温度与气体注射延迟时间的交互作用对“气指”影响较为严重。

Burned or Scorched Parts: Melt temperature may be too high.

典型并发症：烧焦：塑料熔化温度过高。

Yet, when the melt temperature was increased, the mold temperature also increases.

但是，当熔体温度升高，模具温度也随之增加。

Large extrusion output , low and equal melt temperature .

挤出量大，熔体温度低，熔体温度均匀。

Its melt temperature is hingt and it has proper viscosity and low temperature flexibility.

具有较高的熔融温度，适宜的粘度和良好的低温韧性；

The results show that the peak cobalt rodlet temperature doesn't exceed the cobalt melt temperature during these two cases.

结果表明，两种情况下钴靶元件最高温度均未超过其熔点。

How is melt temperature controlled?

如何控制熔炼温度？

Furnaces Used for Melting Metal or Holding Melt Temperature in Aluminium Melting and Casting Works

铝熔铸厂用的熔炼或保温炉

Simulation study of effects of initial melt temperature on microstructure of liquid metal Na during solidification processes

熔体初始温度对液态金属Na凝固过程中微观结构影响的模拟研究

Try to maintain an even, rapid melt flow Increase injection speed Raise melt temperature Raise mould temperature Increase wall thickness

尽量保持均匀和快速的熔体流动注射速度太低提高熔体温度提高模具温度增大壁厚

The application of an automatic thermo-measuring instrumentto the measurement of melt temperature in melted copper

自动测温装置在铜熔炼熔体温度测量中的应用

Prediction of Injection Pressure and Melt Temperature of Injection Molding by Radial Basis Function Network

基于神经网络技术的注塑成型注射压力和熔体温度预测

Parameter control not is precise (mold temperature, melt temperature, cooling time)

参数控制不稳（模温，料温，保压太低或太高，冷却时间）

Continuous Measurement of Melt Temperature on Special Condition

特殊环境下熔体温度的连续测量

those having a relatively big impact on warpage include the melt temperature only;

对翘曲变形影响较大的工艺参数为熔体温度；

Effect of Melt Temperature on the Compound Phase of High Silicon Aluminum Alloy

熔体温度对高硅铝合金中化合物相的影响

Study on Injection Molding Melt Temperature

注塑成型熔体温度的研究

Study on Homogeneity of Glass Melt Temperature in Spout

料盆内玻璃液温度均匀性的研究

Shorten melt residence time and melt temperature

缩短熔化驻留时间和降低温度